View TSSP57P38TT1_8878678.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 1 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ir detector for mid range proximity sensor description the tssp57p38 is a compact infrared detector module for proximity sensing application. it receives 38 khz modulated signals and has a peak sensitivity of 940 nm. the length of the detectors outp ut pulse varies in proportion to the amount of light reflected from the object being detected. ordering code taping: TSSP57P38TT1 - top view taped tssp57p38tt2 - top view taped features ? height of 0.8 mm ? up to 2 m for proximity sensing ? receives 38 khz modulated signal ? 940 nm peak wavelength ? photo detector and pream plifier in one package ? low supply current ? shielding against emi ? visible light is suppressed by ir filter ? insensitive to supply voltage ripple and noise ? supply voltage: 2.5 v to 5.5 v ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? object approach detection for activation of displays and user consoles, signaling of alarms, etc. ? simple gesture controls ? differentiation of car arriva l, static, car departure in parking lots ? reflective sensors for toilet flush ? navigational sensor for robotics block diagram proximity sensing 22531-1 parts table carrier frequency 38 khz tssp57p38 package belobog pinning 1 = out, 2, 3, 6, 7, 8 = gnd, 4, 5 = v s dimensions (mm) 3.95 w x 3.95 h x 0.8 d mounting smd application proximity sensors 33 k 2, 3, 6, 7, 8 4, 5 1 v s out demo- gnd pass agc input pin band dulator control circuit 16833_20 +3 v ir emitter +3 v 38 khz out to c t ss p57p38 envelope s ignal
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 2 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. this is a stress ratin g only and functional operation of the device at these or any other cond itions beyond those indicated in the operational sections of t his specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect the device reliability. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - output active low fig. 2 - pulse length and sensitivity in dark ambient absolute maximum ratings parameter test condition symbol value unit supply voltage v s -0.3 to +6 v supply current i s 5ma output voltage v o -0.3 to (v s + 0.3) v output current i o 5ma junction temperature t j 100 c storage temperature range t stg -25 to +85 c operating temperature range t amb -25 to +85 c power consumption t amb 85 c p tot 10 mw electrical and optical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit supply voltage v s 2.5 - 5.5 v supply current v s = 5 v, e e = 0 i sd 0.55 0.7 0.9 ma e v = 40 klx, sunlight i sh -0.8-ma receiving distance direct line of sight, ir diode tsal6200, i f = 250 ma, test signal see fig. 1 d-40-m output voltage low i osl = 0.5 ma, e e = 0.7 mw/m 2 , test signal see fig. 1 v osl - - 100 mv minimum irradiance pulse width tolerance: t pi - 5/f o < t po < t pi + 6/f o, test signal see fig. 1 e e min. -0.20.4mw/m 2 maximum irradiance t pi - 5/f o < t po < t pi + 6/f o , test signal see fig. 1 e e max. 50 - - w/m 2 directivity angle of half receiving distance ? 1/2 - 75- deg e e t t * t pi 10/f 0 is recommended for optimal function v o v oh v ol t 16110_4 optical test signal (ir diode tsal6200, i f = 0.4 a, 30 pulses, f = f 0 , t = 10 ms) output signal t d 1) t po 2) 1) 7/f 0 < t d < 15/f 0 2) t pi - 5/f 0 < t po < t pi + 6/f 0 t pi * 1.0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.1 1 10 10 2 10 3 10 4 e e - irradiance (mw/m 2 ) t po - output pulse width (ms) input burst length output pulse width = 950 nm, optical test signal, fig.1 0 0.1
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 3 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - frequency depe ndance of responsivity fig. 4 - sensitivity in bright ambient fig. 5 - sensitivity vs. supply voltage disturbances fig. 6 - output puls e width vs. irradiance fig. 7 - sensitivity vs. ambient temperature fig. 8 - relative spectral sensitivity vs. wavelength 0.0 0.2 0.4 0.6 0.8 0.9 1.0 25 30 45 50 f/f 0 - relative frequency e /e - rel. responsivity e min. e 40 35 0.1 0.3 0.5 0.7 f = f 0 5 % f (3 db) = f 0 /10 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.01 0.1 1 10 100 e e - ambient dc irradiance (w/m 2 ) e e min. - threshold irradiance (mw/m 2 ) correlation with ambient light sources: 10 w/m 2 = 1.4 klx (std. illum. a, t = 2855 k) 10 w/m 2 = 8.2 klx (daylight, t = 5900 k) wavelength of ambient illumination: = 950 nm 4.5 5.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1 10 100 1000 v s rms - ac voltage on dc supply voltage (mv) e e min. - threshold irradiance (mw/m 2 ) f = f 0 f = 20 khz f = 30 khz f = 100 hz f = 10 khz 22088 0 20 40 60 80 100 120 140 160 180 200 0.1 1 10 100 t po - output pulse width (ms) e e - irradiance (mw/m 2 ) burst length = 300 ms, f = f o t amb - ambient temperature (c) e e min. - sensitivity (mw/m 2 ) 0 0.05 0.10 0.15 0.20 0.40 -30 -10 10 30 50 70 90 0.30 0.25 0.35 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 750 800 850 900 950 1000 1050 1150 - wavelength (nm) s( ) rel - relative spectral sensitivity 1100
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 4 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - max. rate of bursts fig. 10 - angle characteristic fig. 11 - t po vs. distance fig. 12 - dynamic rang e of sensor vs. t pi the typical application of the tssp57p38 is a reflective sensor with analog information contained in its output. such a sensor is evaluating the time required by the agc to suppress a quasi continuous signal. th e time required to suppress such a signal is longer when the signal is strong than when the signal is we ak, resulting in a pulse length corresponding to the distance of an object from the sensor. this kind of anal og information can be evaluate d by a microcontroller. the absolute amount of reflected light depends much on th e environment and is not evaluated. only sudden changes of the amount of reflected light, and therefore changes in the pulse width, are evaluated using this application. example of a signal pattern: 0 100 200 300 400 500 800 0 40 80 120 180 20 60 100 140 t pi (ms) t repeat min. (ms) 600 700 160 0 0.2 0.4 0.6 0.8 1.0 1.2 -90 90 angle () 70 50 30 10 -10 -30 -50 -70 relative response distance directivity characteri s tic of a reflective s en s or u s ing v s mb1940x01 and t ss p57p38 response distance (m) t po (ms) 0 20 40 60 80 100 120 0.0 0.2 0.4 0.6 0.8 1.0 1.2 i f = 100 ma i f = 50 ma i f = 30 ma i f = 10 ma emitter: v s mb1940x01 t pi (ms) d max. /d min. 0 1 2 3 4 5 6 7 10 20 30 40 110 120 100 90 80 70 60 50 optical signal response of the tssp57p38 (strong reflection) t repeat = 500 ms t pi = 120 ms, 38 khz response of the tssp57p38 (weak reflection)
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 5 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 example for a sensor hardware: there should be no common window in front of the emitter and receiver in order to avoid crosstalk by guided light through the window. the logarithmic characteristic of the agc in the tssp57p38 results in an almost linear re lationship between distance and pulse width. ambient light has al so some impact to the pulse width of this kind of sens or, making the pulse shorter. package dimensions in millimeters emitter t s al6200 ir receiver t ss p57p38 s eparation to avoid cro ss talk by s tray light in s ide the hou s ing notes (1) optically effective area (2) pins connected internally. it is not necessary to connect externally. drawing-no.: 6.550-5315.01-4 issue: 2; 12.02.14 not indicated tolerances 0.1 technical drawings according to din specifications proposed pad layout from component side (dim. for reference only) (3.95) (3.95) (0.35) (0.8) (2.75) (3) (4 x) (4x) 0.55 (0.95) 0.55 (1.8) 0.75 0.05 4 x 0.75 = 3 0.35 0.05 (8 x) 1.5 3 (0.3) (0.3) (0.3) (0.7) 0.475 (0.4) 0.8 0.15 pinning from topview gnd gnd out vs (vs) (gnd) (gnd) (gnd) 1 2 3 4 5 8 7 6 pin 1 identification (2) (2) (2) (2) 3.95 3.95 (2.75) (1.9) (3.4) marking area pin 1 identification (1) (1) (1)
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 6 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 assembly instructions reflow soldering ? reflow soldering must be done within 168 h while stored under a max. tempera ture of 30 c, 60 % rh after opening the dry pack envelope ? set the furnace temperatures for pre-heating and heating in accordance with the reflow temperature profile as shown in the diagram. exercise extreme care to keep the maximum temperature below 260 c. the temperature shown in the profile means th e temperature at the device surface. since there is a temperature difference between the component and the circuit bo ard, it should be verified that the temperature of the device is accurately being measured ? handling after reflow should be done only after the work surface has been cooled off manual soldering ? use a soldering iron of 25 w or less. adjust the temperature of the sold ering iron below 300 c ? finish soldering within 3 s ? handle products only after the temperature has cooled off vishay lead (pb)-free reflow solder profile note (1) moq: minimum order quantity ordering information ordering code packaging volume (1) remarks TSSP57P38TT1 tape and reel moq: 1800 pcs 3.95 mm x 3.95 mm x 0.75 mm tssp57p38tt2 moq: 7000 pcs 0 50 100 150 200 250 300 0 50 100 150 200 250 300 t (s) t (c) 255 c 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 20 s max. ramp up 3 c/s max. ramp down 6 c/s max. 2 cycles allowed 19800
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 7 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tssp57p38 dimensions in millimeters leader and trailer tape: part s mounted empty trailer 200 mm min. empty leader 400 mm min. direction of pulling out unreel direction ? 60 min. ? y 2 0.5 label po s ted here coming out from reel tape po s ition (12.4) 18.4 max. ? 13 0.2 ? 21 0.8 100 mm min. with cover tape x 2:1 tape and reel dimen s ion s : (2) (1.75) (5.5) 12 0.3 (8) (4) (? 1.5) (0.3) reel s ize "y" tt1 ? 180 2 = 1800 pc s . tt2 ? 330 2 = 7000 pc s . (1.2) technical drawing s according to din s pecification s not indicated tolerance s 0.1 drawing-no.: 9.700-5347.01-4 i ss ue: 1; 14.11.11
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 8 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 label standard bar code labels for finished goods the standard bar code labels are product labels and used for identification of goods. the finished goods are packed in final packing area. the standard packing units are labeled with standard bar code labels be fore transported as finished goods to warehouses. the labels are on each packing unit and contain vishay semicond uctor gmbh specific data. dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 168 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c / - 0 c and < 5 % rh (dry air / nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 125 c + 5 c not suitable for reel or tubes. an eia jedec ? standard j-std-020 level 3 label is included on all dry bags. vishay semiconductor gmbh standard bar code product label (finished goods) plain writing abbreviation length item-description -18 item-n u m b er ino 8 selection-code sel 3 lot-/serial-n u m b er batch 10 data-code cod 3 (yww) plant-code ptc 2 q u antity qty 8 accepted b y acc - packed b y pck - mixed code indicator mixed code - origin xxxxxxx+ company logo long bar code top type length item-n u m b er n8 plant-code n2 se qu ence-n u m b er x3 q u antity n8 total length -21 short bar code bottom type length selection-code x3 data-code n3 batch-n u m b er x10 filter -1 total length -17 aluminum bag label reel 15973
tssp57p38 www.vishay.com vishay semiconductors rev. 1.7, 14-apr-16 9 document number: 82480 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 eia jedec standard j- std-020 level 3 label is included on all dry bags esd precaution proper storage and handling pro cedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electrostatic sensitive devices warning la bels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. bar code product label (example) 1. calculated shelf life in sealed bag: 12 months at <40c and <90% relative humidity (rh) 3. after bag is opened, devices that will be subjected to reflow solder or other high temperature process must be 4. devices require bake, before mounting, if: a) humidity indicator card reads > 10% for level 2a - 5a devices or >60% for level 2 devices when read at 235c b) 3a or 3b are not met 5. if baking is required, refer to ipc/jedec j-std-033 for bake procedure 2. peak package body temperature:_______________________c if blank, see adjacent bar code label a) mounted within:___________________hours of factory conditions 30c/60% rh, or b) stored per j-std-033 if blank, see adjacent bar code label bag seal date:_________________________________________ if blank, see adjacent bar code label note: level and body temperature defined by ipc/jedec j-std-020 this bag contains moisture-sensitive devices caution if blank, see adjacent bar code label 3 level 260 168 22650 22178
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 1 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape and reel standards for surface-mount ir receiver modules vishay semiconductor surface-mount ir receivers are packaged on tape and reel. the following specification is based on iec publication 286, which takes the industrial requirements for automati c insertion into account. absolute maximum ratings, me chanical dimensions, optical and electrical characteristics for taped devices are identical to the basic catalog types and can be found in the specifications for untaped devices. packaging the tapes of components are available on reels. each reel is marked with labels which contain the following information: - vishay - type - group - tape code, normally part of type name - production code - quantity missing components up to 3 consecutive components may be missing if the gap is followed by at least 6 components. a maximum of 0.5 % of the components per reel quan tity may be missing. at least 5 empty positions are present at the start and the end of the tape to enable tape insertion. tensile strength of the tape: > 15 n number of components a. panhead: quantity per reel: tt, top view package, 1190 pcs tr, side view package, 1120 pcs b. heimdall: quantity per reel: tt, top view package, 2200 pcs tr, side view package, 2300 pcs c. heimdall without lens : quantity per reel: wtt, top view package, 2200 pcs wtr, side view package, 2300 pcs d. belobog: quantity per reel: tt1, top view package, 1800 pcs tt2, top view package, 7000 pcs e. belobog with shield : quantity per reel: tt1, top view package, 1500 pcs tt2, top view package, 5000 pcs f. minimold df1p: quantity per reel: df1p, 1100 pcs g. tvcastsmd tr: qu antity per reel: tr, side view package, 2200 pcs order designation the type designation of the device is extended by tt or tt1 for top view or tr for side view. example: tsop6238tr (reel packing) tsop75238tr (reel packing) tsop75338wtt (reel packing) tsop57438tt1 (reel packing) tsop57238htt1 (reel packing) tsop39438tr (reel packing)
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 2 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reel dimensions for panhead, heimdall, and tvcastsmd tr in millimeters note ? the body structure of the reel can vary 16734
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 3 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tt (top view) dimensions in millimeters a. panhead (tsop36...tt, tssp....tt, tsop6...tt) 16584
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 4 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tt (top view) dimensions in millimeters b. heimdall (tsop75...tt, tsop77...tt, tssp77...tt) 0.3 3.65 16 7.5 1.75 ? 1.5 ? 1.5 2 8 4 drawing-no.: 9.700-5338.01-4 i ss ue: 4; 12.06.13 technical drawing s according to din s pecification s direction of feed
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 5 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tt (top view) dimensions in millimeters c. heimdall without lens (tsop7 5...wtt, tsop77...wtt, tssp77...wtt) 2 1.75 7.5 16 8 4 3 0.3 ? 1.5 min. ? 1.5 drawing-no.: 9.700-5341.01-4 i ss ue: 3; 06.10.15 technical drawing s according to din s pecification s direction of feed
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 6 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tt1, tsop..tt2 (top view) dimensions in millimeters d. belobog (tsop37...tt1, tsop37.. .tt2, tsop57...tt1 , tsop57...tt2) leader and trailer tape: part s mounted empty trailer 200 mm min. empty leader 400 mm min. direction of pulling out unreel direction ? 60 min. ? y 2 0.5 label po s ted here coming out from reel tape po s ition (12.4) 18.4 max. ? 13 0.2 ? 21 0.8 100 mm min. with cover tape x 2:1 tape and reel dimen s ion s : (2) (1.75) (5.5) 12 0.3 (8) (4) (? 1.5) (0.3) reel s ize "y" tt1 ? 180 2 = 1800 pc s . tt2 ? 330 2 = 7000 pc s . (1.2) technical drawing s according to din s pecification s not indicated tolerance s 0.1 drawing-no.: 9.700-5347.01-4 i ss ue: 1; 14.11.11
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 7 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tt1, tsop..tt2 (top view) dimensions in millimeters e. belobog with shield (tsop37...htt1, tsop37...htt2, tsop57. ..htt1, tsop57...htt2) tape and reel dimen s ion s : reel s ize "y" gs 08 ? 180 2 = 1500 pc s . gs 18 ? 330 2 = 5000 pc s . unreel direction x tape po s ition coming out from reel 2 0.5 not indicated tolerance s 0.1 ? 13 0.2 ? 21 0.8 label po s ted here ? y ? 60 min. 18.4 max. (12.4) leader and trailer tape: part s mounted empty leader 400 mm min. 100 mm min. with cover tape direction of pulling out empty trailer 200 mm min. technical drawing s according to din s pecification s x 2 : 1 reel dimen s ion s and tape drawing-no.: 9.700-5380.01-4 i ss ue: 1; 28.10.13 (8) (2) (4) (? 1.5) (1.75) (0.3) (5.5) (12)
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 8 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..df1p (side view) dimensions in millimeters f. minimold df1p (tsop33...df1p, tsop53...df1p) drawing-no.: 9.800-5052.v3-4 i ss ue: 1; 17.12.02 form of the leave open of the wheel i s s upplier s pecific. dimen s ion s according to iec en 60 286-3 tape width: 24 technical drawing according to din s pecification s reel hub 2:1 ? 20.2 min. 1.5 min. ? 12.8 min. ? 60 min. 24.4 +3 -0 ? 330 +0 -4 drawing-no.: 9.700-5399.01-4 i ss ue: 1; 30.06.16 (6.08) (1.5 min.) (12) (1.75) (11.5) (24) (2) (4) (1.55) (0.4) (5.25) (11.75) b b a a b - b a - a
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 9 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tr (side view) dimensions in millimeters g. tvcastsmd tr (tsop59...tr, tsop39...tr) a-a (2 : 1) b-b (2 : 1) aa b b d i re c t i o n o f f e e d (1.75) (7.5) (16) (? 1) ( 2 ) ( 1 2 ) ( 4 ) ? 1.5 (9.75) ( 2 .8 5 ) ( 7 . 0 5 ) 1 .7 ( ) technical drawing s according to din s pecification. drawing-no.: g o-100220.10_z i ss ue b: 08.02.17
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 10 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tr (side view) dimensions in millimeters a. panhead (tsop36...tr , tssp6...tr, tsop6...tr) 16585
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 11 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tr (side view) dimensions in millimeters b. heimdall (tsop75..., tsop77..., tssp7....) drawing-no.: 9.700-5337.01-4 i ss ue: 2; 06.10.15 2 1.75 7.5 16 8 4 3.6 0.3 ? 1.5 min. ? 1.5 direction of feed 1.34 ref. technical drawing s according to din s pecification s
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 12 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping version tsop..tr (side view) dimensions in millimeters c. heimdall without lens (tsop75...wtr, tsop77...wtr, tssp...wtr) 2 1.75 7.5 16 8 4 3.6 0.3 ? 1.5 ? 1.5 drawing-no.: 9.700-5342.01-4 i ss ue: 2; 12.06.13 technical drawing s according to din s pecification s direction of feed
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 13 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 leader and trailer dimensions in millimeters cover tape reel strength according to din en 60286-3 0.1 n to 1.3 n 300 mm/min. 10 mm/min. 165 to 180 peel angle label standard bar code labels for finished goods the standard bar code labels are product labels and used for identification of goods. th e finished goods are packed in final packing area. the standard packing units are labeled with standard bar code labels be fore transported as finished goods to warehouses. the labels are on each packing unit and contain vishay semicond uctor gmbh specific data. trailer leader no devices min. 200 min. 400 start end devices 96 11818 no devices vishay semiconductor gmbh standard bar code product label (finished goods) plain writing abbreviation length item-description - 18 item-number ino 8 selection-code sel 3 lot-/serial- number batch 10 data-code cod 3 (yww) plant-code ptc 2 quantity qty 8 accepted by acc - packed by pck - mixed code indica tor mixed code - origin xxxxxxx+ company logo long bar code top type length item-number n 8 plant-code n 2 sequence-number x 3 quantity n 8 total length - 21 short bar code top type length selection-code x 3 data-code n 3 batch-number x 10 filter - 1 total length - 17
smd tape and reel www.vishay.com vishay semiconductors rev. 2.2, 21-feb-17 14 document number: 80125 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dry packaging the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. recommended meth od of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 72 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c / - 0 c and < 5 % rh (dry air / nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 125 c + 5 c not suitable for reel or tubes. an eia jedec ? standard jstd-020 level 4 label is included on all dry bags. eia jedec standard jstd-020 level 4 label is included on all dry bags esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electrostatic sensitive devices warning labels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. outer packaging the sealed reel is packed into a pizza box. aluminum bag label reel 15973 caution this bag contains moisture-sensitive devices 1. shelf life in sealed bag: 12 months at < 40 c and < 90 % relative humidity (rh) 2. after this bag is opened, devices that will be subjected to soldering reflow or equivalent processing (peak package body temp. 260 c) must be 2a. mounted within 72 hours at factory condition of < 30 c/60 % rh or 2b. stored at < 5 % rh 3. devices require baking befor mounting if: humidity indicator card is > 10 % when read at 23 c 5 c or 2a. or 2b. are not met. 4. if baking is required, devices may be baked for: 192 hours at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or 96 hours at 60 c 5 c and < 5 % rh for all device containers or 24 hours at 125 c 5 c not suitable for reels or tubes bag seal date: (if blank, see barcode label) note: level and body temperature defined by eia jedec standard j-std-020 4 level 22522 16962 carton box dimensions in millimeters thickness width length pizza box (smd and heimdall) (taping in reels) 50 340 340 thickne ss width 22127 length
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of TSSP57P38TT1

	To Download TSSP57P38TT1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .